Power Units
Standard Engine:
John Deere: 4045HF285 Tier 3, 139 Hp (104 kW) @ 2,400 rpm, developing 387 lb-ft (525 Nm) torque, turbo charged and air to air after-cooled, water cooled diesel engine.
Optional Engine:
Deutz: TCD914L06 Tier 3, 158 Hp (117.9 Kw) @ 2000 rpm, developing 461 lb-ft (625 Nm) torque,
air cooled, 6.5 l, turbocharged, after-cooled diesel engine.
Engines include:
• 12V starting circuit.
• Engine gauges located on the control panel.
• 37 gallon (150 l) fuel tank with lock.
• Lockable battery box
Feed System and Mast
Pulldown force: 11,700 lbs [5,307 kg]
Pulldown speed: 0-100 ft/min [30.48 m/min]
Retract force: 15,700 lbs [7,121 kg]
Retract speed: 0-80 ft/min [24.38 m/min]
Feed stroke: 13 ft [3.96 m]
Mast: 23 ft [7 m]
Rotary Head
Infinitely variable speed from 0 to 1,300 RPM
1,300 RPM @ 242 ft-lb [328 Nm] torque
Maxim torque is 2,750 ft-lb [3,728 Nm]
5-1/8 in [130.2 mm] open bore spindle
18 in [457 mm] Slidramatic hydraulic
lateral off hole clearance
Spindle tachometer
Gear to gear rotary head with oil cooler and filter
Track Carrier
Mobile Drill MT-20 track carrier includes:
• 20,000 [9,072 kg] GVWR capacity carrier
• Remote control
• Low profile "V" style body fabrication
• Four jacks 36 in [914.4 mm] stroke jacks
SPT Automatic Hammer
ASTM D-1586 standards, standard & heavy duty
140 lb [63.5 kg], 170 lb [77.1 kg],
300 lb [136.1 kg], 340 lb [154.2 kg] slugs available
Hydraulic self compensating
Hoists
Main-Single line capacity:
8,500 lbs [3,855 kg]
Line speed: 0–75 fpm [22.8 m/min]
Cable diameter: 1/2 in (.500) [8.26 mm]
Cable length: 100 ft [30 m] standard
Auxiliary -Single line capacity:
4,500 lbs [2,041.17 kg]
Line speed: 0–135 fpm [41.15 m/min]
Cable diameter: 5/16 in (.325) [8.26 mm]
Cable length: 100 ft [30.48 m] standard
Safe-T Driver-Single line capacity:
900 lbs [408.23 kg]
Line speed: variable up, freefall down
Cable diameter: 1/4 in (.250) [6.35 mm]
Cable length: 300 ft [91.44 m] standard
Wireline Winch – Bare drum pull:
2,400 lbs [1,088 kg]
Capacity: 2,500 ft [762 m] of 3/16 in [4.8 mm]
swaged cable
Full Drum Line speed: 1,400 fpm [428 m/min]
Includes a spring applied, hydraulic release brake
Optional Equipment
• 46 in. [1,168 mm] mast dump
• 15 degree engine leveler built into the
body fabrication
• Splinned floating spindle
• Break-out wrench
• Rod clamp, 1-3/8" [34.9 mm] through
5-3/4" [146.1 mm]
• Make & Break rod clamp – various sizes
• Hydraulic chuck
• Water pumps – A variety of piston and/or
progressive cavity
• 10 ft [3 m] rod trough
• Toolboxes
• Top mount water swivel
• Standpipe
• Driller platform
• Night Lights
Estimated Operating Capacities
Wireline Coring: "N" to 1,700 ft [518 m],
"H" to 1,100 ft [335 m], "P" to 730 ft [222 m]
Rotary Drilling: NWJ/NW drill rod to 1,500 ft [457 m]
DTH: 5-1/8 in [130 mm] OD bit and 3-1/2 in [89 mm]
OD drill pipe to 700 ft. [213 m]
Reverse Circulation: 4.5 RC drill pipe to 200 ft. [60 m]
Hydraulic Drill Specs Disclaimer: Actual rotary head performance may vary slightly depending on engine rpm, hydraulic systems’ pressure and pump flow settings.
For all Drilling Depth Capacities on all drills Disclaimer: Above drilling capacities may vary according to subsurface conditions, hoist capacity and drilling medium gpm, cfm and/or psi.