Video Gallery

B37 MP Multi-Purpose

Small footprint – Big drill ROI
Standard rotary head option: 10 – speeds
Low – 8,425 ft-lbs [1,165 kg/m] @ 34 rpm
High – 322 ft-lb [44.5 kg/m] @ 897 rpm
High speed rotary head option: 10 – speeds
Low – 8,000 ft-lb [1,106 kg/m]
High – 300 ft-lb [41 kg/m] @ 1,000 rpm
Retract force: 15,700 lbs [7,121.4 kg]
Pulldown force: 11,700 lbs [5,307 kg]
The most versatile top head drive drill in the marketplace today
Auger, Core, Rotary, DTH, Reverse Circulation, Angle drilling capable

Feed System

Pulldown force: 11,700 lbs [5,307 kg]
Pulldown speed: 0-100 ft/min [30.48 m/min]
Retract force: 15,700 lbs [7,121 kg]
Retract speed: 0-80 ft/min [24.38 m/min]
Feed stroke: 6 ft [1.8 m] or 13 ft [3.96 m]

Power Unit

Standard Engine:
John Deere Tier 3, 99 Hp (74 kW) @ 2400 RPM,
developing 261 lb-ft (353 N-m) torque,
    4.5 l diesel engine, water cooled
Optional Engines:
Deutz Tier 3, 98 hp (73 kW) @ 2300 RPM,
developing 246 lb-ft (333 Nm) torque,
    5.4 l diesel engine, air cooled.
    Cummins Tier 3, 99 Hp (74 kW) @ 2600 RPM,
    developing 306 lb-ft (415 Nm) torque,
    3.3 l diesel engine, water cooled
Engines include:
• 12V starting circuit
• Engine gauges located
        on the control panel
• 37 gallon (150 l) fuel tank with lock
• Lockable battery box

Rotary Heads Available

Open Bore: 4-5/8 in [117.5 mm]
Off Hole: 15 in [381 mm] Slidramatic
    hydraulic off hole clearance
STANDARD HEAD:
    10-Speeds total with a high/low shift
       on the control panel
    Maximum Rotary Speed:
       897 rpm @ 322 ft-lb [436 Nm] torque
    Maximum Rotary Torque:
       8,400 ft-lb [11,389 Nm] @ 34 rpm
HIGH SPEED HEAD:
    10-Speeds total with a high/low
        shift on the control panel
    Rotary Speed Range:
        1,000 rpm @ 300 ft-lb [407 Nm]
    Rotary Torque Maximum:
        8,000 ft-lb [10,846 Nm]
    Oil cooler with filter for the
        Right Angle Drive (RAD) gearbox

Estimated Operating Capacities DTH:

    5-1/8 in [130 mm] OD bit
    and 3-1/2 in [89 mm] OD drill pipe
    to 700 ft. [213 m]
Reverse Circulation:
     4.5 RC drill pipe to 400 ft. [122 m]
Hollow Stem Auger:
     4-1/4 in [108 mm] ID to 175 ft [53 m]
Continuous Flight Auger:
     6 in [152 mm] OD to 300 ft [91 m]
Rotary Drilling:
     NWJ/NW drill rod to 1,500 ft [457 m]
Diamond Core Drilling:
     N wireline to 1,600 ft [487 m]

Hoists

Main-Single line capacity:
    8,500 lbs [3,855 kg]
    Line speed: 0–75 fpm [22.8 m/min]
    Cable diameter: 1/2 in (.500) [8.26 mm]
    Cable length: 100 ft [30 m] standard
Auxiliary -Single line capacity:
    4,500 lbs [2,041.17 kg]
    Line speed: 0–135 fpm [41.15 m/min]
    Cable diameter: 5/16 in (.325) [8.26 mm]
    Cable length: 100 ft [30.48 m] standard
Safe-T Driver-Single line capacity:
    900 lbs [408.23 kg]
    Line speed: variable up, freefall down
    Cable diameter: 1/4 in (.250) [6.35 mm]
    Cable length: 300 ft [91.44 m] standard
Wireline Winch – Bare drum pull:
    2,400 lbs [1,088 kg]
Capacity: 1,500 ft [457 m] of 3/16 in [4.8 mm]
swaged cable
Full Drum Line speed: 1,400 fpm [428 m/min]
    Includes a spring applied,
    hydraulic release brake

SPT Automatic Hammer

ASTM D-1586 standards, standard & heavy duty
140 lb [63.5 kg], 170 lb [77.1 kg],
300 lb [136.1 kg], 340 lb [154.2 kg]
slugs available
Hydraulic self compensating

Leveling Jacks

Three or four jacks (depending on mounting option),
24 in [609.6 mm] or
36 in [914.4 mm] stroke
12" swiveling round pad at bottom of the jack

Optional Equipment

• Mast: 19 ft [5.8 m] or 23 ft [7 m]
• In-out slide base/Side-to-side slide base
• 46 in. [1,168 mm] mast dump
• Break-out wrench
• Rod clamp, 1-3/8" [34.9 mm]
     through 5-3/4" [146.1 mm]
• Make & Break rod clamp – various sizes
• Hydraulic chuck
• Water pumps – piston, centrifugal
   and progressive cavity
• Combination auger/rod rack
• Under body swing out auger racks
• 10 ft [3 m] rod trough
• Toolboxes
• Water tanks 100-500 gal
     [37.5 l–1,892.5 l] steel, plastic or stainless steel
• Top mount water swivel
• Standpipe
• Drive tool quick change adapters
• Driller platform
• Night Lights

Hydraulic Drill Specs Disclaimer: Actual rotary head performance may vary slightly depending on engine rpm, hydraulic systems’ pressure and pump flow settings.
For all Drilling Depth Capacities on all drills Disclaimer: Above drilling capacities may vary according to subsurface conditions, hoist capacity and drilling medium gpm, cfm and/or psi.