Hoists
Main—Single line capacity:
4,500 lbs [2,041.17 kg]
Line speed: 0–135 fpm [41.15 mpm]
Cable diameter: 5/16 in (.325) [8.26 mm]
Cable length: 100 ft [30.48 m] standard
Safe-T Driver—Single line capacity:
900 lbs [408.23 kg]
Line speed: Variable up, freefall down
Cable diameter: 1/4 in (.250) [6.35 mm]
Cable length: 300 ft [91.44 m] standard
Wireline—Single line capacity:
1,200 lbs [544.3 kg]
Line speed: 0–500 fpm [0–152.4 mpm]
Cable diameter: 3/16 in (.185) [4.7 mm]
Cable length: 400 ft [121.92 m] standard
Winch capacity: 3,500 ft [1,066.8 m] cable
Estimated Operating Capacities
Hollow stem augers, 4-1/4 in [108 mm] ID:
130 ft [40 m]
Continuous flight auger, 6 in [152.4 mm] OD:
225 ft [67 m]
Rotary drilling, NWJ/NW drill pipe:
1,000 ft [305 m]
Diamond core drilling, NQ: 900 ft [275 m]
Note: Above drilling capacities may vary according to subsurface conditions, hoist capacity and drilling medium gpm and psi.
SPT Automatic Hammer
ASTM D-1586 standards, standard and heavy duty
140 lb [63.5 kg], 170 lb [77.1 kg], 300 lb [136.1 kg],
340 lb [154.2 kg] slugs available
Hydraulic self compensating
Leveling Jacks
Three or four jacks (depending on mounting option),
24 in [609.6 mm] or 36 in [914.4 mm] stroke
12” swiveling round pad at bottom of the jack
Optional Equipment
• Mast: 20 ft [6.1 m] or 25 ft [7.6 m]
• In-out slide base/Side-to-side slide base
• Above deck combination auger/rod rack
• Auger racks under body swing out
• Rod trough
• Toolboxes
• Water tanks 100-500 gal [37.5 l–1,892.5 l]
steel or stainless steel
• Top mount water swivel
• Standpipe
• Water pumps
• Break-out wrench
• Drive tool quick change adapters
• Rod clamp system
• Driller platform
• Night Lights
Mounting Options
Truck, trailer, rubber track carrier, or skid