Hydraulic Feed System
Pulldown force: 23,300 lbs [10,568.7 kg]
Retract force: 35,300 lbs [16,011.8 kg]
Feed speed, down: 61 ft/min [18.59 m/min]
Feed speed, retract: 40 ft/min [12.19 m/min]
Feed stroke: 6 ft [1.83 m]
Power Unit
Deck engines: Cummins, Deutz Diesel, John Deere
Drill Head Rotary
3-SPEEDS
Open bore: 4-3/4 in [120.65 mm]
High Speed Rotary Box: 13,000 ft-lbs [17,625 Nm]
@ 15 rpm, Max. 962 rpm
High Torque Rotary Box: 19,000 ft-lbs [25,760 Nm]
@ 15 rpm, Max. 664 rpm Torque and RPM are engine specific. Consult factory for complete specifications.
Estimated Operating Capacities
Hollow stem augers, 4-1/4 in [108 mm] ID:
350 ft [106.68 m]
Continuous flight auger, 6 in [152.4 mm] OD:
450 ft [137.16 m]
Rotary drilling, 2-5/8 in [66.68 mm] OD drill pipe:
1,550 ft [472.4 m]
Diamond core drilling, NQ: 2,350 ft [716.28 m]
Note: Above drilling capacities may vary according to subsurface conditions and rotary head option.
SPT Automatic Hammer
ASTM D-1586 standards, standard and heavy duty
140 lb [63.5 kg], 170 lb [77.1 kg]
300 lb [136.1 kg]
340 lb [154.2 kg] slugs available
Hydraulic self compensating
Leveling Jacks
Single front/dual rear, 24 in [609.6 mm] or
36 in [914.4 mm] stroke
Hoist
MAIN–SINGLE LINE CAPACITY:
12,000 lbs [5,443.1 kg]
Line speed: 52 fpm [15.85 mpm]
Cable diameter: 5/8 in (.625) [15.88 mm]
Cable length: 100 ft [30.48 m] standard
MAIN–SINGLE LINE CAPACITY:
8,500 lbs [3,855.54 kg]
Line speed: 0-75 fpm [0-22.86 mpm],
0-325 fpm [0-99.06 mpm] reverse
Cable diameter: 1/2 in (.500) [12.7 mm]
Cable length: 100 ft [30.48 m] standard
AUXILIARY–SINGLE LINE CAPACITY:
4,500 lbs [2,041.17 kg]
Line speed: 0-135 fpm [41.15 mpm]
Cable diameter: 5/16 in (.325) [8.26 mm]
Cable length: 100 ft [30.48 m] standard
SAFE-T DRIVER–SINGLE LINE CAPACITY:
900 lbs [408.23 kg]
Line speed: variable up, freefall down
Cable diameter: 1/4 in (.250) [6.35 mm]
Cable length: 300 ft [91.44 m] standard
WIRELINE–SINGLE LINE CAPACITY:
1,200 lbs [544.3 kg]
Line speed: 0-500 fpm [0-152.4 mpm]
Cable diameter: 3/16 in (.185) [4.7 mm]
Cable length: 400 ft [121.92 m] standard
Winch capacity: 3,500 ft [1,066.8 m] cable
Optional Equipment
• Mast: 26 ft [7.92 m] or 30 ft [9.14 m]
• In-out slide base/Side-to-side slide base
• Above deck combination auger/rod rack
• Auger racks under body swing out
• Rod trough
• Toolboxes
• Water tanks 100-500 gal [37.5 l-1,892.5 l]
stainless steel
• Top mount water swivel
• Standpipe
• Water pumps
• Hydraulic rod chuck
• Break-out wrench
• Drive tool quick change adapters
• Rod clamp system
• Driller platform
Mounting Options
Truck, trailer, rubber track carrier
Hydraulic Drill Specs Disclaimer: Note: Actual rotary head performance may vary slightly depending on engine rpm, hydraulic systems’ pressure and pump flow settings.
For all Drilling Depth Capacities on all drills Disclaimer: Above drilling capacities may vary according to subsurface conditions, hoist capacity and drilling medium gpm, cfm and/or psi.