B42 Mechanical Drill

 
 
Specifications   Download PDF
Feed System
  •   Pulldown Force: 13,823 lbs (6,270 kg)
  •   Pulldown Speed: 97 ft/min (30 m/min)
  •   Retract Force: 21,599 lbs (9,797 kg)
  •   Retract Speed: 62 ft/min (19 m/min)
  •   Feed Stroke: 72 inches (182.9 cm)
Power Unit
  •   Deutz Tier 4i, 57.7 hp (43 kW) @ 2,300 RPM Diesel Engine
  •   Engines Include: Lockable Battery Box, 20-Gallon (75.7 l) Lockable Fuel Tank, Cold Weather Starting Package, Engine Control Monitoring Panel
Right Angle Drive
  •   Single-Speed Heavy-Duty Right Angle Drive in Oil Bath
  •   NO-Disconnect, Universal Joint Drive Line to Rotary Box
Rotary Box
  •   Enclosed ‘Dry Box’ with Tapered Roller Bearings
  •   1-3/4” Steel Kelly Drive Bar Drive to the Rotary Drive System
  •   Single Speed Rotary Box
  •   One Rotary Box Used For Either High Speed or High Torque Rotated When Switching Between the Two
  •   High Torque Side: 4,470 ft-lb (6,060 Nm) - Maximum 488 RPM
  •   High Speed Side: 2,861 ft-lb (3,879 Nm) - Maximum 763 RPM
SPT Options Available
  •   SPT Automatic Hammer
    • ASTM D-1586 Standards, Standard Duty and Heavy Duty Slugs Available: 140 lb (63.5 kg), 170 lb (77.1 kg), 300 lb (136.1 kg), and 340 lb (154.2 kg)
    • Hydraulic Self-Compensating
  •   Cathead
    • 8-in (203 mm), 3,000 lb (1,361 kg)
    • Hydraulic Motor-Powered
Safety Equipment
  •   Emergency Drive Line Spindle Brake - Standard
  •   Lifeline Shutoff System - Standard
  •   E-Stops - Standard
  •   Optional Wobble Emergency Shutoff Switches
  •   Optional Safety Cage
Mast Options with 3 Sheave Crown Block
  •   18-ft (5.5 m): Allows for Pulling 15-ft (4.5 m) Drill Rod
  •   23-ft (7 m): Allows for Pulling 20-ft (6 m) Drill Rod
Estimated Operating Capabilities
  •   Hollow Stem Augers: 3-1/4 in (83 mm) ID to 100-ft (30.5 m)
  •   Continuous Flight Augers: 6-in (152.4 mm) OD to 150-ft (45 m)
  •   Rotary Drilling: NW J/NW Drill Pipe to 750-ft (229 m)
  •   Diamond Core Drilling: NQTM to 859-ft (262 m)
  • Note: Above drilling capabilities may vary according to torque and RPM optioni selected, subsurface conditions, hoist capacity, and drilling medium gpm and psi.
Hoists
  •   Main: 5,000 lbs (2,268 kg), Bare Drum
    • Line Speed, Bare Drum: 0-60 fpm (18 m/min)
    • Cable Diameter: 5/16-in (.325) [8.26 mm]
    • Cable Length: 100-ft (30.48 m) Standard
  •   Main: 4,500 lbs (2,041 kg), Bare Drum
    • Line Speed, Bare Drum: 0-135 fpm (41.15 m/min)
    • Cable Diameter: 5/16-in (.325) [8.26 mm]
    • Cable Length: 100-ft (30.48 m) Standard
  •   Auxiliary: 3,000 lbs (1,361 kg), Bare Drum
    • Line Speed, Bare Drum: 0-126 fpm (36.9 m/min)
    • Cable Diameter: 5/16-in (.325) [8.26 mm]
    • Cable Length: 100-ft (30.48 m) Standard
  •   Auxiliary: 2,850 lbs (1,293 kg), Bare Drum
    • Line Speed, Bare Drum: 0-199 fpm (61 m/min)
    • Cable Diameter: 5/16-in (.325) [8.26 mm]
    • Cable Length: 100-ft (30.48 m) Standard
  •   Wireline: 900 lbs (408.2 kg)
    • Line Speed: 0-500 fpm (0-152.4 m/min)
    • Cable Diameter: 3/16-in (.185) [4.7 mm)
    • Cable Length: 700-ft (213 m) Standard
  •   Safe-T Driver: 900 lbs (408.2 kg)
    • Line Speed: Variable Up, Freefall Down
    • Cable Diameter: 1/4-in (.250) [6.35 mm]
    • Cable Length: 300-ft (91.44 m) Standard
  • Note: Hoists are limited to one (1) main and one (1) auxiliary, and either a wireline or Safe-T-Driver hoist.
 
Other Drill Optional Equipment
  •   In-Out Slide Base, Side-To-Side Slide Base, Tandem Hydraulic Pump, Hinged Low Height Crown Block, Rod Clamps and Breakout Wrench, Night Light Package, Control Panel Covers, Side Inlet Water Swivel, Standpipe, Water Pumps - Progressive Cavity and Triplex Piston Type Pumps, Drive Tool Quick Change Adapters
Carrier Options
  •   Truck, Track, ATV, Trailer, Skid
Mounting Options
  •   Custom Body Fabrications, Above Deck Combo Auger/Rod Rack, Redi-Rack Auger Storage, Under-Body Auger Racks, Rod Trough, Toolboxes, 24-in (609.6 mm) or 36-in (914.4 mm) Hydraulic Stabilizing Jacks, Drillers/Helpers Step Platform, Cab Bulkhead, Steel or Stainless Steel Water Tanks (100 to 500 Gallon) [37.5 l to 1,892.5 l], Front Winches (12,000 lb) [5,443 kg] Hydraulic or (16,500 lb) [7,484 kg] Electric
Basic Unit Weight
  •   Minimum: Unknown 5,550 lb (2,495 kg)
Hydraulic System
  •   Non-Mobile Track Carrier: Single Gear Primary Pump, Optional Tandem Gear Pump
  •   Mobile Track Carrier: Variable Displacement Load Sense Primary Pump and Auxiliary Gear Pump
  •   Electric Fan Type Hydraulic Oil Cooler
  •   30 Gallon (113.5 l) Hydraulic Oil Tank
Newsletter Signup
Sign up to receive the latest news and special offers from Mobile Drill!