 |
Click for brochure
B540
The B-540 is an all hydraulic drill with applications
in the geothermal and water well industries.
The hydraulic rotary head drive allows safe operation
at full capacity by reducing vibration and cushioning
the drive train against shock loads. The enclosed
low-maintenance hydraulic drive system keeps dirt
out to help minimize wear.
The B-540 is sized for mounting on a variety of
carriers to provide go-anywhere versatility. Rubber
tracks, truck, and trailer mounts are the most common
setups.
The B-540 can be powered either from a carrier engine
or a dedicated drill engine.
| Estimated
Operating Capacities |
| Rotary drilling, air or fluid,
6-8 in [152.4 -203.2 mm] with 3-1/2 in [89 mm] OD drill
pipe: 1000 ft [304.8 m] |
DTH, 6-1/2 in [165 mm] with
4-1/2 in [114.3 mm] OD pipe with shock sub:
600 ft [182.88 m] |
| Note: Above drilling capacities
may vary according to subsurface conditions. |
| Drill
Head Rotary |
Maximum rotary speed: 190 rpm [19.9 rad/s] high,
95 rpm [9.95 rad/s]
low |
Torque: 4,000 ft-lbs [5423.3 Nm]
low,
2,000 ft-lbs [2711.64 Nm] high |
| 2-speeds |
| 2-7/8 in [73.03 mm] API IF pin |
| Hydraulic
Feed System |
| Pulldown force: 16,000 lbs
[7,256 kg] |
| Retract force: 24,000 lbs
[10,884 kg] |
| Feed speed, down: 0–71
ft/min [21.64 m/min] |
| Feed speed, retract: 0–48
ft/min [14.63 m/min] |
| Feed stroke: 13 ft [3.96 m] |
Click here to download a
pdf file including complete specs and optional equipment.
To talk to a sales representative about this rig,
call 1-800-766-3745 or
email Sales@MobileDrill.net. |
|
|
