Mobile Drill Intl - New Drills, Used Drills, New Drill Rigs, Used Drill Rigs, Augers & more!

About Us

History

Innovations

Contact

Mobile Drill Intl
US Office
3807 Madison Avenue
Indianapolis, IN 46227
1-800-766-3745
Sales@MobileDrill.net

Rigs Available Now to Rent

To discuss any of the listed rigs, please contact Tim Sabo, President at 1-800-766-3745 or Tim.Sabo@MobileDrill.net.

B57 Pre-Owned 90 Day Warranty

Available for Rent or Purchase

Specs
Mounted on 1990 F 800 4x2 Ford Diesel, 30,000 GVWR
5 speed transmission
with 2 speed rear axle.
8500 Ft Lbs Torque
2 Speed Right Angle Drive, 8 Forward Speeds 2 Reverse Speeds
5 Speed Manual Transmission
13” Clutch, Speed Range 65 – 800 RPM
Pulldown 18,650 lbs
Retract 28,270 lbs
3.250” Hollow Spindle
Cummins 4BT Diesel Powered
26’ Heavy Duty Mast with 4 line Crown Block
8500lb Pullmaster Main Hoist
Safety Driver Hoist
3200lb Koenig Auxiliary Hoist
4 Jaw Manual Chuck with NW Jaws
Quick Change Adapter with 2” Auger Coupling
In / Out Slidebase
Side to Side Slidebase
12’ Body Fabrication
2 Manually Hinged Underbody Auger Racks
Underbody Rod Storage
Tilt Cab Option for Front Jack
Front Frame Extension
1 Front Mounted 36” Leveling Jack
2 Rear mounted 36” Hydraulic Leveling Jacks
250 Gallon Water Tank with Lock up rod storage under tank
1 1/4” Mast Standpipe
Lockable Battery Box
Driller Platform
140lb Safety Hammer Rack.
3L6 Progressive Cavity Water Pump
Redi Rack

B59 Pre-Owned
Available for Rent or Purchase Click here for Full Specs	Specs CARRIER 1995 Ford F-800, 6cyl Diesel engine, 80,888 miles 33,000 lbs GVWR, 2 - 50 gallon fuel tanks, Air Brakes 7,231 hours on drill Paint - Mobile Standard Red BASIC UNIT SPECS 3F/1R speed Transmission /Torque Converter 2 speed Right Angle Drive with 3 speed clark transmission allows F/R 6 speed rotary spindle. High Torque Rotary Box - 2" kelly bar drive/4-3/4" open bore spindle 2 Hydraulic Feed Systems - 28,500lb. retract force/ 20,000 lb. feed force. 30' Mast Proportional/Electric over Hydraulic Controls Mobile LIFELINE Shutdown Switch w/ manual reset Mast Raise/Lower Safety Alarm 100 HP Cummins 4BT 3.9 Turbo charged diesel Engine - 260 ft/lbs torque BASIC UNIT OPTIONS 120 psi Utility Air Compressor In/Out Slidebase - up to 15" movement Sideways Slidebase - 12" of side travel/ 6" off center Hydraulic Break-Out Wrench 2" Mast Standpipe HOIST & SPT SAMPLING OPTIONS 8,500 lb.Main Hoist - Bi-directional hydraulic planetary hoist with fail-safe hydraulic brake 4,500 lb Auxiliary Hoist - Bi-directional w/ fail-safe hydraulic brake. SAFE-T-DRIVER Hoist - 900 lb capacity 2,500 LB Cathead ROTARY HEAD SPINDLE ATTACHMENTS Mobile Gimbal Coupling Auger Quick Change for the Hydraulic Chuck, Fluted Kelly and Manual Chuck. BODY FABRICATION AND MOUNTING OPTIONS Body Fabrication - A custom fabricated steel body 14'lg Underbody Drill Rod Storage Rack 10'-6 D x 23 1/2" W x 2-3/4"H Hinged Auger Racks mounted under deck both sides of drill 2 Double Tool Box - 6.2 cubic ft tool box (16" H x 42" W x 16" D) Rear Under-Deck Tool Box Front Frame Extension Tilt Front Jack Option 1 - 36" Front Mounted Leveling Jack w/ 12" swiveling pad 2 - 36" Front Mounted Leveling Jacks w/ 12" swiveling pad 250 gal. Water Tank/Combination 10" x 24" x 94" Tool Storage Steel Operator / Helper Step Platform Safety Hammer Rack OTHER OPTIONS Main Hoist Free Spoiling Option TRAINING AVAILABLE AT MOBILE DRILL
B53 In Stock
Available for Rent or Purchase	For details, give us a call at 1-800-766-3745 or send us an email.